| Working frequency | 125HKz |
| Communication format | 9600BPS 8,N,1. |
| Card reading distance | >13cm (long distance thick card up to 20cm) |
| Card reading time | <100ms |
| Card reader type | IC (MF1) card |
| Output interface | standard ESD |
| Serial interface protocol | (RS232) ASC |
| Encoding head (or extended keyboard code)) | |
| Technical indicators Ambient temperature | -10°C -40°C |
| Power supply | DC-5V USB or keyboard port power supply |
| Relative humidity | 15%～85%RH |
| Maximum power consumption | 100mW |
| Card reading distance | 0-20cm |
| Dimensions | length 110mm*width 80mm height*25mm |
| Net weight | ≈0.3 kg |
Q1. What is the operating voltage range for this Wired Infrared Detector?
A: The working voltage for this Wired Infrared Detector is in the range of DC9 to DC16 volts.
Q2. What is the typical current consumption of the detector at a DC12V input?
A: The consumption current for the detector is approximately 25mA when operated at DC12V.
Q3. Can this detector function in extreme temperature conditions?
A: Yes, the Wired Infrared Detector is designed to operate within a temperature range of -10℃ to +55℃.
Q4. What type of sensor is used in this detector?
A: This detector utilizes a dual-element low noise pyroelectric infrared sensor for accurate motion detection.
Q5. How can I mount the detector? Can it be installed on both walls and ceilings?
A: The detector offers flexibility in mounting and can be installed either on the wall or the ceiling.
Q6. Is there a specific installation height requirement for this detector?
A: Yes, the recommended installation height for optimal performance is below 4 meters.
Q7. What is the detection range of this Wired Infrared Detector?
A: The detector has a detection range of 8 meters, allowing it to cover a significant area.
Q8. What is the detection angle of this detector?
A: The Wired Infrared Detector provides a detection angle of 15 degrees for accurate motion sensing.
Q9. Could you explain the pulse counting options available for this detector?
A: This detector offers pulse counting options: primary (1P) and secondary (2P), allowing for customizable sensitivity.
Q10. What is the purpose of the anti-disassembly switch and its voltage output?
A: The anti-disassembly switch has a normally closed (NC) no-voltage output configuration. It features a contact capacity of 24VDC and 40mA, enhancing security.